Utility & lineups
Every grenade, infinite, with a landing preview and the flight trail. Save the throws that work as lineups, then drill them on a loop with an aim target that turns green when you're lined up.
.util / .utilityEnter utility mode
Pick Utility and a map
Open Play, choose Utility and pick a map. Lineups are saved per map.
Play, or practice one lineup
Play on the mode's picture starts utility mode on that map. Practice on a lineup in the list starts it and puts you straight on that lineup. The list shows the map's first six; the link under it opens all of them in the Library.

Type .util (or .utility). You have to be on T or CT.
.nade 3 from another mode switches to utility mode too.
.aim, .prefire or any other mode command leaves it, and so does a map change.
In utility mode you get:
- Every grenade, infinite: smoke, flash, HE, molotov (an incendiary on CT) and decoy, given again every time you spawn.
- Landing preview: CS2's preview of where the grenade in your hand will land.
.predictionturns it off and on. - Flight trail: the path of every throw stays for 6 s.
.trajectory 10sets the seconds (up to 30),.trajectory 0turns it off. - Air time and distance: when a grenade lands, chat says how long it flew and how far: Smoke landed after 1.84 s · 23 m away · .save name to keep it.
Save a lineup
Throw
Throw the grenade the way you want to keep it. Watch where it lands.
Save it
Type
.devonce (developer mode), then.save Xbox from T spawn. Your last throw becomes a lineup with the next free number: Saved #4 Smoke "Xbox from T spawn" · Jump throw · left click.The landing fills in
If you saved before it landed, the landing spot and flight are added the moment it lands. Without a name it's called Smoke 4; names can be up to 40 characters.
Everything about the throw is detected for you:
- Position
- Where you stood. For a jump throw, where you took off.
- Aim
- Your exact view angles at release.
- Crouch
- Whether you were crouching.
- Jump / run
- A jump throw, and a run throw when you were moving faster than 130 units per second.
- Click
- Left click, right click or both (left + right).
- Landing
- Where it landed or popped, the air time and the recorded flight path.
Together they make the how-to you see everywhere, such as Run + jump throw · crouch · left click or Standing throw · right click. Saving the same throw twice says it's already saved: throw again to save another.
Go to a lineup
.nadeslists the map's lineups (the first 8 in chat, all of them in the console). Filter by type or name:.nades smoke,.nades flash,.nades xbox. Types are smoke, flash, he, molotov and decoy..nade 3or.nade xboxputs you on the spot, looking exactly where to aim, with the grenade in hand. Chat shows how to throw it (How: Jump throw · left click · lands after 1.8 s), and smokes and fires from before are cleared..nextand.prevstep through the lineups by number and wrap around..restarttakes you back to the last one (or to your locked spawn, if you have one).- Practice on the Play page or in the Library does the same as
.nade.
Lineup numbers stay put when you delete others, so .nade 7 is always the same lineup.
Practice on a loop
Start the loop
Type
.start. You're put on the first saved lineup, grenade in hand.Throw it
The camera follows your grenade through the air (the center says Following grenade · .end returns to the player).
Watch the result
The view holds on the smoke, flash or fire for 2 seconds after it pops, then you're on the next lineup. Old smokes and fires are cleared. After the last lineup comes the first again.
Stop
.endstops the loop and brings the camera back at once; you move freely again..startbegins again at the first lineup.
While the loop runs, .next, .prev and .restart skip or retry, and .clear
returns the camera too.
The loop moves on only when you throw the lineup's own grenade type. Taking a spawn stops the loop.
The Utility page: the official lineups
Library → Utility shows every official lineup that has a video, on the map. It's on every plan.
- The map. Each spot the lineups land on is one mark in the grenade's color, sized like what it leaves, with the number of throws to it. Point at one to see its throws; click it to see every throw: the grenade's real flight from above (a straight dashed line when it has none) from a numbered dot where you stand. Maps with two levels (Nuke, Vertigo, Train) have an Upper / Lower switch.
- The panel. With nothing picked it lists the spots by callout. A spot picked shows its first throw's video, Throw 2 of 3 with Previous and Next, how to throw it (jump throw, crouch, which click), where it lands and how far, and its other throws. ← and → step through the throws, Esc goes back to the list.
- Map or Video. The switch at the right of the toolbar puts the video big and the map small beside it instead. It's kept for next time.
- Find one. The search finds names, descriptions, techniques, tags and callouts. T / CT shows one side's throws (those of neither side show under both). My spawn shows only the throws from your spawn, numbered as in game ("T 3"), and marks it on the map.
- Practice this throw starts utility mode on that map with you on its spot, grenade in hand, and scores every throw against where it should land, as in Scored throws.
- Your progress. Throws you've landed (within 2.5 m) are marked on the rows, the spots and the map, with "12 of 34 landed" over the list. Not landed yet shows only the rest, and Practice the ones you haven't landed plays them one after another (up to 30), each throw scored. Nade Drill and scored throws both count.
- Share a throw. The copy button next to a throw's name copies its link; it opens that map, spot and throw.
From a 2D replay
Saw a throw or a position in a match that you want to try? Two buttons in the 2D replay start utility mode on your cloud server, on that match's map, and put you right there. Your server starts, or a running one switches: "Utility mode on Mirage – switch to CS2".
Practice this throw
Open the grenade
In the replay, click the grenade on the radar (or press I for the last one thrown) to open its card, and press Practice this throw.
Join
Press Connect in the replay's top bar once it says "Ready on Mirage", or in the server panel.
Watch the original
You stand where it was thrown from, with the same aim and that grenade in hand. The spot is marked with a ring and the landing with a ring and the grenade's icon, in the grenade's colour. A moment later the original is thrown once, along its recorded path: Watch where it lands, then throw it yourself.
Throw it
Chat says how it was thrown: How: Jump throw. Same spot, same aim: you're set. Its landing spot is marked. The center repeats it, for example Smoke from the replay · No jump, with ", crouching" when the thrower crouched.
Again
.restartputs you back on the spot with the grenade in hand. The original isn't thrown again.
- The replay can tell a jump throw from one on the ground, but not standing from running, so No jump covers both.
- A flash shown this way doesn't blind you.
- Like it? Once you've thrown it yourself,
.savekeeps it as a lineup. - On a match imported before Grindhouse recorded exact throws, the aim is worked out from the grenade's flight and is approximate, and the original can't be thrown, only its landing spot marked (This replay doesn't have the throw's flight, so it can't be shown.). See Details in newer replays.
- If your server can't throw the original (for a while after a CS2 update this can happen with smokes), chat says The original throw can't be shown on this server. Its landing spot is marked.
Practice this spot
Follow a player to the moment
In the replay, follow the player (click them or press their number) and go to the moment you want.
Press Practice this spot
The button is in the replay's top bar while you follow a player who's alive at that moment.
Stand there
You're put where they stood, facing their way, with every grenade as usual in utility mode. A white ring marks the spot. Chat: Spot from the replay · s1mple, round 7 at 0:23 and Where they stood, facing the same way. (". They were crouching" when they were).
For both, .restart and every respawn bring you back to the spot, until you go to a lineup or lock a spawn (those come first). .aim or another mode leaves. The exact up-and-down aim is only recorded at kills, deaths and throws. At any other moment the angle up or down is approximate, and chat says Their exact aim isn't in the replay for this moment, so it's approximate.
Scored throws (Fix this throw)
Fix this throw on a smoke or molotov in Your grenades starts utility mode the same way, where you threw it from, with your lineup's landing marked instead of the original's. Every throw of that grenade is then scored against the lineup's landing: chat says 1.4 m off, a hit. 3 of 10. (within 2.5 m is a hit), and after 10 throws Window smoke: 10 throws, 7 within 1 m, 9 hits, 1.2 m off on average. Another request, .util again or leaving utility mode stops the scoring and sums up the throws so far. Each scored throw is an attempt in your utility session.
Markers and the aim target
Every saved lineup is marked in the world in its grenade's color:
- A standing circle on the floor where you throw from. Walk near one and the center of the screen names the lineups there and how to throw them.
- A grenade icon (the grenade's own model, scaled up) where it lands or pops. It glows while you can see it.
The aim target
Step inside a throw circle and a bright red dot appears on the lineup's saved aim line, with a black outline so it stands out on any wall or sky. Put your crosshair on the dot: when your view is within 0.2° of the saved angles the dot turns green and the center text says Aim aligned, followed by how to throw. Until then it says Aim at the red dot.
- It shows while you stand on the ground (not in noclip) holding that lineup's grenade, or no grenade.
- Where circles overlap, the lineup you went to with
.nade 3wins. - It disappears when you step out of the circle.
Flight paths
Aim at a grenade icon and press E: its recorded flight appears as small dotted lines in the same color, and the
center text says [E] hide flight path. Press E on it again to hide it. A lineup saved before flight
paths were recorded has none yet: go there with .nade 3 and throw it once the same way to record it.
Grenade colors
.markers hides or shows the circles and icons, and with them the aim target (hiding them also clears a shown flight path). Spawn markers have
their own switch, .spawns. Up to 40 lineups are drawn at once, always including the one you're practicing.
Rethrow, replay and other tools
.rethrow- Throws your last grenade again, from where you threw it.
.rethrow 0 1 2- Throws several recent grenades again at once: 0 is the last, up to 10 back. Ranges and lists work:
.rethrow 0-3,.rethrow 0,2. .replay- Throws your last grenade again from its original spot and follows it with the camera, wherever you stand now. The view holds on the result for 2 s, then comes back;
.endreturns at once. A replay never changes what.savekeeps and never moves the loop on. .last- Back to where you threw your last grenade, same aim, grenade in hand.
.clear- Removes smokes, fires and grenades in flight.
.autoclear- Smokes, fires and decoys disappear 2 s after they pop.
.autoclear 5sets the seconds,.autoclear offstops it. Off until you turn it on. .noclip- Fly through walls; again to land.
.flyworks too. .noflash- Flashbangs don't blind you. Dummy bots still report flash time.
.break- Breaks every window, vent and glass pane.
.cleanupcloses doors;.cleanup mapreloads the map back into utility mode to restore everything. .timer- Times a run-out or rotation. See Spawns & timers.
Note: Right after a CS2 update
For a while after a CS2 update your server may not be able to
throw smokes again with .rethrow 0 1 2: it then says which ones it couldn't. Plain .rethrow and
.replay always work with every grenade. See Troubleshooting.
Dummy bots
.bot leaves a dummy where you stand, facing you, on the other team (.bot t or .bot ct
picks a side). You can have up to 10. Flash one and chat reports it:
Flash: <bot> blinded for 2.31 s – full flash (2 s or more is a full flash, under 0.8 s says
barely). Dummies don't take damage until you type .botstakedamage on, which adds HE and fire
damage readouts. .botcrouch, .botboost and the rest are on Bots & difficulty.
Grenade finder
Don't know a lineup for a spot? Let the trainer search for one.
Draw the landing area
Type
.draw, aim at the ground and click (Mouse1 or Mouse2) for one corner, then the opposite corner..drawagain redraws it.Search from where you'll throw
Stand there (crouch if you want crouched throws), hold the grenade and type
.find, or.find smokefor a type..findslowspreads the search thinner so the game stays smooth.Try the results
.resultslists what it found, best first..results 1or.n/.pput you on one with the exact aim and the grenade in hand. Throw it, and chat says how far from the prediction it landed. Keep the ones you like with.save.
.accuracy cycles the search between low, medium (the default) and high.
Rename and delete lineups
In game: .renamenade 3 Xbox smoke and .delnade 3.
In Library → Nade lineups, pick the map. Chips filter by type (with counts), and a Filter by name box appears once a map has 6 or more lineups. Each row shows the grenade, number and name, the throw (Jump throw) and its air time, with Practice and a ⋯ menu. The menu shows the full how-to, the distance and when it was saved, and has Rename and Delete (Delete forever?). On a lineup from a Community pack it's Remove the whole pack, which asks Remove the whole pack?, since a pack comes and goes as a whole. Changes made there reach the game on their own, no restart needed.
New lineup starts utility mode on the map: throw, then .save <name>. The
How utility mode works fold under the heading has the short version of this page and the
binds, with a Copy button.

Lineup packs added from the Community hub are grouped under
From the Community hub, one row per pack. Its ⋯ menu has
Open on the Community hub, Update to version 2 (when there's a newer version)
and Remove from library. In game, .nades and .nade mark them (by <author>).
Publish lineup pack… shares some of your own: see Publish your own.
Where lineups are saved
Your lineups are kept with your Grindhouse account. Every cloud server you start gets them, and what you save or change in game is sent back while you play.
One-time binds
bind "h" "css_rethrow"; bind "j" "css_clear"; bind "v" "css_noclip"; bind "n" "css_next"; bind "l" "css_restart"
Paste it once into the CS2 console (~): H rethrows, J clears, V flies, N goes to the next lineup and L back to the last one (or your locked spawn). The prefire editor binds use some of the same keys; the line you paste last wins.
Commands
| Command | What it does |
|---|---|
.dev [off|prefire|anchor|util].developer | Developer mode: stops what the mode is playing at once (the round or run ends, the bots go) and turns on the editing commands of the mode you are in (.new, .edit, .bot, .save, .test …), which do what that mode edits: an Anchor spot, a prefire route, a utility lineup. .dev again turns it off and plays on; changing mode turns it off too. On a map with no prefire routes yet: .dev prefire, then .new. Example: .dev |
.util.utility | Switches to utility mode: every grenade, infinite, with the landing preview, flight trails and your saved lineups on this map. |
.noflash | Flashbangs don't blind you; type it again to turn it off. Works in every mode. Dummy bots still report flash time. |
.break | Breaks every window, vent and glass pane on the map. .cleanup map brings them back. |
.cleanup | Closes every door on the map. |
.cleanup map | Utility mode: reloads the map to restore broken glass, vents and doors, and comes back in utility mode with your lineups. |
.undo.pf_undo | Removes the last bot you placed (in utility mode, the last dummy). |
.crouch [id].pf_crouch | Toggles crouch on the bot you aim at, or bot number id. |
.save [name] | In developer mode (.dev): saves your last throw as a lineup: spot, exact aim, crouch, jump or run throw and which click. The landing spot is added when it lands. Example: .save Xbox from T spawn |
.nades [filter].lineups | Lists this map's lineups. Filter by type (smoke, flash, he, molotov, decoy) or by name. The first 8 show in chat, all of them in the console. Example: .nades smoke |
.nade <number or name> | Puts you on a lineup's spot, aiming exactly where it was thrown, grenade in hand. Switches to utility mode if needed. Example: .nade 3 |
.next | Goes to the next saved lineup. |
.prev | Goes to the previous saved lineup. |
.restart | Takes you back to your locked spawn, or to the lineup you went to last so you can retry it. |
.start | Practises every saved lineup in a loop, from the first: the camera follows each grenade, and 2 seconds after it pops you move to the next. |
.end | Stops the lineup loop (or a replay) so you can move freely. |
.rethrow [numbers] | Throws your last grenade again. With numbers it throws several of your last 10 throws at once: 0 is the most recent, and ranges (0-3) or lists (0,2) work too. Example: .rethrow 0 1 2 |
.replay | Throws your last grenade again from where you threw it and follows it with the camera, wherever you stand now. .end returns to you. |
.last | Takes you back to where you threw your last grenade, same aim, grenade in hand. |
.clear | Removes all smokes, fires and grenades in flight. |
.autoclear [seconds|on|off] | Off by default. Once on, smokes, fires and decoys disappear 2 seconds after they pop, or after the seconds you give (up to 30). No argument toggles it; .autoclear off or 0 turns it off.Example: .autoclear 3 |
.trajectory [seconds].trail | How long the flight trail stays after each throw: 0–30 seconds (default 6), 0 turns trails off. No value shows the current time. Example: .trajectory 10 |
.prediction.preview | The landing preview while you hold a grenade, on or off. On by default. |
.noclip.fly | Fly through walls, on or off. Utility mode only. |
.markers | Shows or hides your lineups' standing circles and grenade icons (shown by default). Hiding them also clears the selected flight path. |
.delnade <number> | In developer mode (.dev): deletes a lineup by its number. Example: .delnade 3 |
.renamenade <number> <name> | In developer mode (.dev): renames a lineup. Example: .renamenade 3 Xbox smoke |
.bot [t|ct] | Utility mode: leaves a dummy bot where you stand, crouching if you are, up to 10. It joins the other team unless you name one, says in chat how long each flash blinded it, and can't be hurt until .botstakedamage on. |
.botcrouch [t|ct].botduck | Utility mode: leaves a crouching dummy bot where you stand, on the other team unless you name one. |
.botstakedamage [on|off] | Lets dummy bots take damage, so HE and fire show damage readouts and bots can die and respawn. Off each time you enter utility mode; no argument toggles it. |
.botboost [t|ct] | Adds a bot beneath you and puts you on top of it, for boost spots. Stand on the ground with noclip off. Utility mode only. |
.botrunboost [t|ct] | Adds a bot beneath you that you ride: it runs wherever you move. Jumping off stops it. Utility mode only. |
.dismiss [id].del .delete | Removes the bot you aim at, or bot number id. The other bots are renumbered. |
.draw | Grenade finder: aim at the ground and click two corners (Mouse1 or Mouse2) to mark where the grenade should land. .draw again redraws. |
.find [type] | Grenade finder: searches throws from where you stand (standing or crouched) into the drawn area, for the grenade in your hand or the type you name: smoke, flash, he, molotov or decoy. Example: .find smoke |
.findslow [type] | Grenade finder: the same search, spread out so the game stays smooth. |
.accuracy [low|medium|high] | Grenade finder search accuracy (default medium). No argument cycles it. Applies to the next search. |
.results [number] | Grenade finder: lists the lineups found, best first. With a number it takes you to that one, exact aim and grenade in hand. Example: .results 1 |
.n | Grenade finder: the next result. |
.p | Grenade finder: the previous result. |
.spawn [t|ct] [number].aspawn | Takes a competitive spawn by number, facing out of it, and locks it: respawns and .restart put you back there. Your side unless you name one; spawns are numbered left to right as you face out. With no number it takes the spawn under your crosshair, or says how many spawns the map has; .spawn aim only takes the one under your crosshair. Switches to utility mode.Example: .spawn ct 2 |
.spawn off | Unlocks the spawn, so you respawn normally again. |
.tspawn [number].atspawn | Takes T spawn number n and locks it. Example: .tspawn 4 |
.ctspawn [number].actspawn | Takes CT spawn number n and locks it. Example: .ctspawn 1 |
.rspawn [t|ct] | Takes a random spawn, either side or the side you name, and locks it so .restart repeats it. Type it again for a new one. |
.rtspawn | Takes a random T spawn and locks it. |
.rctspawn | Takes a random CT spawn and locks it. |
.spawns | Shows or hides the T and CT spawn markers (shown by default). Aim at one and press E to take it. |
.timer | Arms a timer that starts when you move and stops when you stand still, then prints the time. Type it again to cancel. Utility mode only. |
.timer2 | A stopwatch: starts now and stops when you type .timer2 again. Utility mode only. |
Spawns and timers: Spawns & timers. Recording executes: Strats. Placing and moving dummies: Bots & difficulty.