Bots & difficulty
How hard the bots play in each mode, what they carry, and the commands to place and control bots by hand in utility mode and the prefire editor.
Bots in each mode
| Mode | Bots | Shoot back | Difficulty |
|---|---|---|---|
| Aim | 1–10 at once, appearing in your view. Stand still by default. | Off by default (.shoot) | The ladder, Easy to Insane |
| Prefire | The route's bots, holding their spots. | On by default (.shoot) | The ladder, set separately from Aim |
| Deathmatch | 0–20 bots that roam and fight. | Always | CS2's own four levels |
| Utility | Up to 10 dummies you place yourself. | Never | None |
| Recoil control | Still targets you place with .bot or .botduck. | Never | None |
| Spray, Spray transfer | Spray: 3 to 5 rushers, more as your rating climbs. Spray transfer: always 3. | On by default (.shoot) | Follows your rating (.elo) |
| The gunfights: Anchor, Lone Wolf, Site Hold, Rush, Endless | Bots on the other team that peek or rush you, how many depending on the mode and your rating. Their guns: .presets. | On by default (.shoot; rounds without it aren't rated) | Follows your rating (.elo) |
| The peeks: Peek Drill, Angle Check, Ambush; Team Hold and Defusal | Bots that hold the angles you peek, swing at you, run an execute or hold a planted site. Their guns: .presets. | On by default (.shoot; rounds without it aren't rated) | Follows your rating; with friends, your team's average |
| Pop | None. | – | – |
| Movement | One bot on your team that shows each jump, then waits out of sight. | Never | None |
| Showdown | One bot while you're alone, holding the angle or peeking it. | Always | Follows your Showdown rating |
| Play this round | A bot for everyone else in the round, on their recorded paths, fighting when they notice you. | Always | Each like its player's rank in the match (Premier, FACEIT, skill group); without ranks, or with .botlevel me, your level from the other modes |
| Retakes, Scrim | Bots that fill both teams around the players: in Retakes to the game's size (.bots 7 by default, 2 to 10, .bots 0 for none), in Scrim to five a side. | Always | CS2's hard |
The difficulty ladder
Aim and Prefire share six levels. The first four are CS2's own bot difficulty; the top two pick only CS2's best bots and, at Insane, take away their aim spread.
| Level | Command | Which bots join | How they play |
|---|---|---|---|
| Easy | .diff easy · .diff 0 | CS2 picks bots of that difficulty | CS2's easy bots |
| Normal | .diff normal · .diff 1 | CS2's normal bots | |
| Hard | .diff hard · .diff 2 | CS2's hard bots. The default. | |
| Expert | .diff expert · .diff 3 | Only CS2's Expert bots | Reaction time 0.20 s |
| Super hard | .diff superhard · .diff 4 | Only CS2's Elite bots | Reaction time 0.05 s, much tighter aim |
| Insane | .diff insane · .diff 5 | CS2's Elite bots, their aim spread held at zero | As Super hard, with their aim spread held at zero every tick: no spread at all |
- Change it with
.difficultyor.diffplus a name or a number.super hard,superhardandsuper-hardall work. With no value it shows the current level. - Fresh bots join when you change it, because CS2 only applies difficulty as a bot joins.
- Named bots run out. CS2 has 12 Elite and 10 Expert bots, so at Super hard and Insane any bots past 12 are Expert bots. Past 10 bots at Expert, or 22 at Super hard and Insane, CS2 picks the rest itself. That matters in prefire routes, which can hold up to 25 bots.
- Aim: difficulty only matters while bots shoot back, so it's greyed out on the Play page otherwise. Difficulty when they shoot back under Play → Aim → More settings.
- Prefire: a separate setting, Bot difficulty under Play → Prefire → More settings. In a prefire run
.difficultychanges the prefire level and restarts the run.
Note: How Insane plays
Insane plays with CS2's Elite bots, their aim spread held at zero every tick, so they don't miss where they aim. Steady feet, quick trigger and the harder practice levels past 2600 work as on every other level.
Note: If Super hard feels like Expert
Expert, Super hard and Insane choose bots by name from the game's own bot list, read from the server's game files each time it starts, so after a CS2 update the list comes from the new game files. If the list is missing or can't be read, these levels fall back to CS2's own pick of expert bots. Insane still holds their aim spread at zero.
Deathmatch difficulty
Deathmatch uses CS2's native bots with CS2's four levels: Easy, Normal, Hard (default) and Expert. Set it with Bot difficulty under Play → Deathmatch → More settings, or with .difficulty expert / .diff 0-3. In game, .difficulty superhard and .difficulty insane (.diff 4, .diff 5) go past Expert, and Practice (.prac) picks the level from the bots' rating (.elo, .level). Easier bots raise the K/D goal of your deathmatch rating.
Spray drills, gunfights and utility
In Spray and Spray transfer, your rating in that mode sets the bots' timing, how soon and how well they shoot back and, in Spray, how many rush you, so .difficulty doesn't apply there. The gunfights work the same way: your rating sets the bots' reaction time, how they swing, how many come and their aim, and .bots and .difficulty say they don't apply. Utility dummies and recoil targets never shoot, so they have no difficulty.
Practice: pick the bots' level
In practice (.prac, or Practice under Play style on the Play page) the gunfights, the peeks, Team Hold, Defusal, Prefire, Deathmatch and the spray drills play at a level you pick instead of your rating: any rating from 300 to 3900, in steps of 100 on the Play page. Competitive always plays at your rating.
- On the Play page: the Bots list, Your level first, then every level grouped by rank, each rank saying what its bots play like. Easier and Harder beside it move it one rank (300) from the level picked, or from your rating in the mode with Your level, rounded to 100; they stop at 300 and 3900.
- In game:
.level veteran,.level grindmaster 3(orgm3),.level godlike(3900) or.level 1850;.easierand.hardermove it one rank, the same way. From competitive they switch to practice. The menu (.menu) has Competitive, Practice · your level, Practice · easier, Practice · harder and More levels with every rank.

Each rank's word plays near the middle of the rank. What the bots there play like, and how soon one may fire once it sees you:
| Rank | .level plays at | Plays like | Reacts in |
|---|---|---|---|
| Recruit | 750 | ≈ 5.5k Premier | 0.75 s |
| Grinder | 1050 | ≈ 8.5k Premier | 0.64 s |
| Marksman | 1350 | ≈ 11.5k Premier | 0.54 s |
| Veteran | 1650 | ≈ 14.5k Premier | 0.44 s |
| Specialist | 1950 | ≈ 18k Premier | 0.36 s |
| Ace | 2250 | ≈ 22.5k Premier | 0.29 s |
| Grindmaster 1 | 2500 | ≈ 27.5k Premier | 0.20 s |
| Grindmaster 2 | 2850 | beyond 30k Premier | 0.14 s |
| Grindmaster 3 | 3150 | faster than human reaction | 0.12 s |
| Grindmaster 4 | 3450 | faster than human reaction | 0.10 s |
| Grindmaster 5 | 3750 | faster than human reaction | 0.09 s |
Up to 2600 the bots keep the aim and habits they always had at each level. Past it they keep getting harder up to 3900: quicker to fire, more of their hits on you count as headshots (about 29% at 2600, every one at 3900), shorter gaps between peeks and tighter goals; each mode's page has its numbers. Below 600 the scripted bots keep getting easier down to 300. A level saved or shared from before, up to 5000, plays at 3900.
Shooting back and frozen bots
In Aim training two switches decide what bots do: Bots stand still and Bots shoot back, under Play → Aim → More settings. Both also have a command:
| Don't shoot (default) | Shoot back | |
|---|---|---|
| Stand still (default) | Static targets that always face you. Their AI is switched off: no walking, jumping or looking around. | They hold their spot and fire at you. |
| Move | They walk around with CS2's bot AI. | They move and fire at you. |
.freezeswitches between standing still and moving (.fov_freezealso works)..shootswitches shooting back on and off (.fov_shootalso works). In a prefire run,.shootis the prefire setting instead.- If a bot kills you in Aim training you respawn on the same spot a second later.
Bot weapon and armor
Bots in Aim, Prefire, Utility and the Recoil control hold an AK-47 by default. Aim and Prefire bots also carry a knife. Other modes arm their bots themselves:
- Deathmatch: a Desert Eagle plus an AK-47. The pistol pools give bots only the Desert Eagle.
- Spray drills: the rifle of the bots' side: AK-47 as T, M4A4 as CT.
- One bot:
.botgungives a setup bot its own gun, for example.botgun awp 2. In the prefire editor it's saved with the route.
Armor: Bot armor under Play → Aim → More settings (Kevlar + helmet by default) is what Aim and Prefire bots wear, and .botarmor cycles it in game: kevlar + helmet, kevlar, none. Setup bots can also have their own armor with .botkevlar and .bothelmet, kept when they respawn. Deathmatch and spray drills give bots full armor.
Manual bot setup
In utility mode (.util) and the prefire editor (.new, or Edit in game in a route's ⋯ menu in the Library) you place bots by hand: dummies to test flashes and molotovs on, or the bots a prefire route will hold. Aim training and scored prefire runs keep their own bot settings, so these commands don't work there.
Place a bot
Stand where it should be and type
.bot. Crouch first, or use.botcrouch, for a crouching bot.Select it
Aim at it, or add its number to the command.
.botinfolists every bot with its number.Adjust it
Give it a gun with
.botgun ak, move it with.bring, crouch it with.crouch.
Selecting a bot
Every command that takes [id] works on the bot you aim at: anywhere on its body, within a few degrees of your crosshair, in plain view. Or give its number, counting from 1 in the order the bots were added: .crouch 3. With no bot under your crosshair, .botinfo lists them all, for example #1 T | stand | ak47 | kevlar + helmet | HP 100. When you remove a bot the numbers close up.
Place
.bot[t|ct]- A bot where you stand, crouching if you are. The team is for utility only; without it, and always in the editor, the bot joins the other team. Utility holds up to 10 dummies, a prefire route up to 25 bots.
.botcrouch[t|ct]- A crouching bot where you stand.
Adjust and move
.crouch[id]- Toggles the bot between crouching and standing.
.botstand[id]- Makes it stand. Refused when the ceiling is too low.
.bring[id]- Moves the bot to where you stand; step away afterwards. There has to be room for it, and in the editor you need to be on the ground with noclip off.
.bringaim[id]- Same as
.bring, and the bot copies the way you face. A prefire bot with a saved facing holds that angle instead of watching you. .botgun<gun> [id]- Gives the bot a weapon, by any weapon shortcut:
.botgun awp 2.
Remove, respawn and inspect
.dismiss[id]- Removes the bot (
.delalso works)..undoremoves the last one added. .dismissall- Removes every setup bot.
.botrespawn[id|all]- Puts one bot, or all of them, back alive on their saved spots. With no argument, all.
.botinfo[id]- Team, stance, gun, armor and health of one bot, or of all when none is selected. The exact position goes to the console.
Utility only
.botboost[t|ct]- Spawns a bot beneath you and puts you on top, for boost spots. Stand on the ground, noclip off, with headroom, and stay put until you're lifted.
.boost[id]- Puts you on top of the bot. Your view direction doesn't change.
.jump[id]- The bot jumps once. It has to be alive and on the ground.
.botstakedamage[on|off]- Whether dummies take damage. No argument switches it. Off at the start of every utility session.
| Bot damage | Off (default) | On |
|---|---|---|
| Health | Invulnerable | Normal damage; bots can die |
| Readouts | Flash duration | Flash duration, plus HE and fire damage |
| Killed bots | — | Come back on their spot (unless .respawnbots off) |
Switching it resets every bot to 100 HP. The choice lasts until you leave utility mode, through placing, moving and respawning bots and the .start / .end loop. Bots keep holding their guns but never shoot. The Recoil control has its own .botstakedamage for its targets, off by default.
More setup commands
.help bots in game lists these too:
.botkevlar/.bothelmet[id]- Toggle kevlar, or a helmet (which adds kevlar), on one bot. Kept when it respawns.
.respawnbots[on|off]- Whether killed setup bots come back on their spot after a second (on by default). Off, they stay down until
.botrespawn. .xray[on|off]- Bots glow through walls, T orange and CT blue. Works in any mode and turns off when the mode changes.
.mimic[id|off]- The bot copies your movement, keeping its distance. Again to stop.
.runboost[id|off]- Stand on the bot and it runs under you; jumping off stops it. In utility mode, with no bot under your crosshair a new one spawns beneath you (
.botrunboost[t|ct] does that directly).
Commands
| Command | What it does |
|---|---|
.xray [on|off] | Bots glow through walls: T orange, CT blue. No argument toggles it. Works in every mode and turns off when you change mode. |
.bots <1-10> | How many bots are alive at once in aim training, 1–10 (default 1). Kill one and another appears in view. Example: .bots 3 |
.freeze.fov_freeze | Bots stand still or move. They stand still by default. |
.shoot.fov_shoot | Aim training bots shoot back, on or off (off by default). .difficulty sets how well they shoot. |
.difficulty [level].diff | Bot difficulty in aim training: easy, normal, hard, expert, superhard or insane (0–5, default hard). It matters once bots shoot back. No value shows the current level. Example: .difficulty expert |
.botarmor | Cycles bot armor: kevlar + helmet (default), kevlar, none. Not in deathmatch, the Recoil control or the spray drills. |
.bot.pf_bot | Prefire editor: places a route bot where you stand, crouching if you are. Stand on the ground, away from the other bots. Route bots always join the other team, so a team name is refused here. Up to 25 bots per route. |
.botcrouch.botduck | Prefire editor: places a crouching route bot where you stand, on the other team. |
.crouch [id].pf_crouch | Toggles crouch on the bot you aim at, or bot number id. |
.bot [t|ct] | Utility mode: leaves a dummy bot where you stand, crouching if you are, up to 10. It joins the other team unless you name one, says in chat how long each flash blinded it, and can't be hurt until .botstakedamage on. |
.botcrouch [t|ct].botduck | Utility mode: leaves a crouching dummy bot where you stand, on the other team unless you name one. |
.botstakedamage [on|off] | Lets dummy bots take damage, so HE and fire show damage readouts and bots can die and respawn. Off each time you enter utility mode; no argument toggles it. |
.botboost [t|ct] | Adds a bot beneath you and puts you on top of it, for boost spots. Stand on the ground with noclip off. Utility mode only. |
.botrunboost [t|ct] | Adds a bot beneath you that you ride: it runs wherever you move. Jumping off stops it. Utility mode only. |
.dismiss [id].del .delete | Removes the bot you aim at, or bot number id. The other bots are renumbered. |
.botstand [id] | Makes the selected bot stand. Select a bot by aiming at it, or give its number (.botinfo lists them). |
.bring [id] | Moves the selected bot to where you stand. In the prefire editor, stand on the ground with noclip off. |
.bringaim [id] | Like .bring, and the bot faces where you look. |
.botgun <gun> [id] | Gives the selected bot a weapon; use the weapon shortcut names (ak, awp, deagle…). Example: .botgun awp 2 |
.dismissall | Removes every setup bot (utility mode or the prefire editor). |
.botrespawn [id|all] | Brings one bot, or all of them (the default), back alive on its saved spot. |
.botinfo [id] | Shows the selected bot's number, team, stance, weapon, armor and health. Aiming at no bot lists them all. |
.botkevlar [id] | Toggles kevlar on the selected bot. It keeps it when it respawns. |
.bothelmet [id] | Toggles a helmet (with kevlar) on the selected bot. It keeps it when it respawns. |
.respawnbots [on|off] | Whether killed setup bots come back on their spot (on by default). When off they stay down until .botrespawn. No argument toggles it. |
.boost [id] | Puts you on top of the selected bot. Utility mode only. |
.jump [id] | The selected bot jumps once. Utility mode only. In Movement, .jump is the jump recorder instead. |
.mimic [id|off] | The selected bot copies your movement, keeping its distance from you. Type it again, or .mimic off, to stop. |
.runboost [id|off] | Puts you on the selected bot and it runs under you as you move. In utility mode with no bot aimed at, a new one spawns beneath you. Jumping off or .runboost off stops it. |