Strats
Record each player's part of an execute in utility mode, then play every role back at once with bots, grenades included. Take one role yourself and practice it against the rest of the team.
.record … .stoprecordWhat a strat is
A strat is a recorded execute on one map. It's made of roles: one player's part each (chat calls them
recordings or POVs). You record the roles one after another, alone, and .play runs them all at
the same moment with one bot per role. It lives in
utility mode. You can also take a whole round from a match: see From a 2D replay.
Record a strat
Go to utility mode
Press Record a strat in Library → Strats, or type
.utilin game. A role is recorded on the side you're on, T or CT.Stand where the player starts
Walk there, or take a spawn (E on its marker, or
.spawn 2; see Spawns & timers). With a spawn locked,.recordputs you on it facing out, and.arecordkeeps your current view instead.Start recording
Type
.record. After a 3 second countdown (Recording in 3…) the center shows ● REC..record 5 A main smokewaits 5 seconds (0 to 30) and names the role; without a name it's POV 1, POV 2 and so on.Play the role
Move, switch weapons, jump and throw your grenades as you would in the execute. The center shows the time and grenade count.
Stop
Type
.stoprecord, or double right-click. Chat confirms it: Recording #1 "A main smoke" kept: 18.2 s · 2 grenades.Record the other roles
Repeat for each player.
.recslists them (number, name, side, length, grenades),.clearrec 2deletes one,.clearrecsdeletes them all.Check and save
.playruns them together. Happy with it?.savestrat B splitsaves it for this map, and it shows up in your Library.
A double right-click doesn't stop the recording while you hold a grenade or a scoped gun (AWP,
SSG 08, SCAR-20, G3SG1, AUG, SG 553), since there it's part of the play. Use .stoprecord.
- A role stops by itself after 3 minutes, and when you die (what you recorded so far is kept).
- A role keeps its first 40 grenades; any thrown after that aren't recorded. In playback a couple of grenades leave per tick at most, so several due at the same moment fly a tick or two apart.
.stoprecordduring the countdown cancels it.- With a spawn locked, every
.recordstarts on that spawn. Unlock it (.spawn off) to start a role somewhere else.
What a recording keeps
- Movement
- Your position, view, speed and crouch on every tick.
- Weapons
- Every weapon switch, at the moment you made it.
- Jumps
- When you left the ground.
- Grenades
- Each grenade's type, release point and release speed, so playback throws it along the same path.
- Side
- T or CT: the side you were on.
Shooting isn't recorded: playback bots move and throw, they don't fire.
From a 2D replay
Any round of a match with a 2D replay can become a strat without recording anything: each player you pick becomes a role that moves, switches weapons and throws their grenades the way they did in that round. Take an execute from a demo you uploaded, or your own team's round.
Go to the round
Open the match's 2D replay and go to the round you want.
Press Save round as a strat
It's in the replay's top bar, in the ⋯ menu. Playback pauses and the form Save round 7 as a strat opens over the replay.
Pick the side
T or CT. It starts on the side of the player you follow, else the side you played that round, else T.
Pick the players
Everyone on that side who was alive when the round went live is listed and ticked. Each row says how long their role runs and how it ends (until they died, to the round's end, until they left or the first 3 minutes) and how many grenades they threw. Players who can't be a role say Not in the round or Dead when the round started.
Name it
It's called after the map, round and side, for example Mirage R7 T; change it if you like (up to 40 characters). The line under it sums up the strat: 4 roles · 1:05 long · 6 grenades.
Save to library
Saved to your library, with Play it and Done.
- Play it starts utility mode on your cloud server with the strat loaded and played, one bot per role, like Play in the Library. To take a role yourself, stand near its start in game and type
.replacebefore.play(see Play one role yourself). - Saving never replaces a strat: when the map already has one with that name, the new one is called Mirage R7 T 2, 3 and so on.
- It's saved with your account like any other strat: it shows in Library → Strats,
.stratslists it in game, and you can edit it with.loadstrator publish it. - The replay has each player's position 16 times a second; the strat fills in the movement in between. As with a recording, shots aren't kept and a role lasts 3 minutes at most.
- Cancel, the × or Esc closes the form. While it's open, the replay's keys are off.
The form says what won't be exact, before and after saving:
| Note | Why |
|---|---|
| "Grenades may not land exactly: this replay is from before throws were recorded in full." | An older replay: each grenade's throw is worked out from its flight. See Details in newer replays. |
| "Bots won't crouch: this replay doesn't say when players crouched." | An older replay without crouching. |
| "2 grenades left out: too little of the flight is in the replay." | A grenade whose flight the replay barely caught. |
If the round can't be turned into a strat, the form says why ("This round can't be saved as a strat: …", or "This round is too long to save as a strat. Pick fewer players.") and nothing is saved.
Play it back
.playputs one bot on the start of each role, on its side. The center says Strategy playback: bots getting into position… (it waits up to 8 seconds), then every role starts at once: ▶ STRAT 4.2 / 18.0 s · .play stops.- Bots follow their recording exactly, switch weapons and throw their grenades at the recorded moments.
- Playback ends 1 second after the longest role (Playback finished (18.0 s). .play runs it again.).
.playwhile it runs stops it. - Utility mode has room for 10 bots, and dummy bots you placed count too. Roles past that are skipped, and chat says how many.
.timer2times the whole execute, and.dryrunrestarts the round with freeze time; see Spawns & timers.
Play one role yourself
Stand near your role's start
Go to where the role you want to play begins.
Type .replace
Chat names the role that starts nearest you: Replace set: you play #4 "Entry".
Play
At
.playthat role gets no bot, and you're put on its start as the others begin..replaceagain goes back to a bot for every role.
Note: Right after a CS2 update
For a while after a CS2 update your server may not be able to throw recorded smokes: playback then skips smokes, and flashes, HE grenades, molotovs and decoys are still thrown. See Troubleshooting.
Save, load and delete
.savestrat B split- Saves the current roles as a strat for this map. The same name again saves over it.
.strats- Lists the map's strats: number, name, roles and length (the first 10 in chat, all of them in the console).
.loadstrat 2- Loads a strat by number or name (
.loadstrat b split; the start of a name works too). Its roles replace the current ones. .delstrat 2- Deletes a saved strat. The roles you have loaded stay.
To change a strat, load it, fix it with .clearrec, .record and .play, then save it
under the same name. Roles you haven't saved are lost when the map changes.
Strats in the Library
Library → Strats follows your utility map. Each row shows the strat's roles and length (4 roles 0:18), with Play and a ⋯ menu. The menu shows its grenades and when it was saved, and has Publish to the Community hub… (your own strats) and Delete.
- Play starts utility mode on that map, loads the strat and plays it as soon as you're in.
- Delete asks Delete forever?. On a copy from the Community hub the menu says Remove from library and asks Remove from your library?.
- Publish to the Community hub… shares it: see Publish your own.
- The How strats work fold under the heading sums up recording. You can record as many roles as
you like;
.playruns 10 bots at most, and dummy bots you placed with.botcount toward that.

There's no rename button: load the strat, save it under the new name, then .delstrat the old one.
Where strats are saved
Your strats are kept with your Grindhouse account. Every cloud server you start gets them, and a strat you save in game is sent back while you play.
Strats from the Community hub
On the Community page, the Strats tab lists strats other players published. Add puts a copy in your Library; Play adds it if needed and plays it in utility mode: Playing "B split" by Garnet · 4 recordings.
- Copies carry a by <author> chip in the Library. In game,
.stratsmarks them (by Garnet) and.loadstratsays Loaded "B split" by Garnet. .savestratwith a copy's exact name saves over that copy and keeps the link to the author's strat.- When the author publishes a new version, the row says Version 2 is out and its menu has Update to version 2, which replaces your copy.
- A copy can't be published again; only your own strats can.
Commands
| Command | What it does |
|---|---|
.dryrun [seconds] | Restarts the round with 0–60 seconds of freeze time (default 5) so you can time an execute. Freeze time goes back to normal afterwards. Not in deathmatch or the spray drills. Example: .dryrun 10 |
.record [delay] [name] | Utility mode: after a countdown (default 3 seconds, up to 30) records your movement, weapons and grenades as one role, up to 3 minutes. On a taken spawn you start on it, facing out. Example: .record 5 A main smoke |
.arecord [delay] [name] | Like .record, but keeps your view angles at a taken spawn. |
.stoprecord | Finishes the recording, or cancels the countdown. A double right-click also stops it, except with a grenade or a scoped gun in hand. |
.play | Plays every recording at once, one bot per role with its grenades (10 bots at most, counting dummy bots). Type it again to stop. |
.recs.currentrecs | Lists the current recordings: number, name, side, length and grenades. |
.clearrec <id> | Deletes one recording. Example: .clearrec 2 |
.clearrecs | Deletes all current recordings. Saved strats stay. |
.replace | You play the role that starts nearest you: no bot for it, and .play puts you at its start. Type it again to clear. |
.savestrat <name> | Saves the current recordings as a strat for this map. It shows up in the Library. Example: .savestrat B split |
.strats | Lists the saved strats on this map. |
.loadstrat <number or name> | Replaces the current recordings with a saved strat. .play runs it.Example: .loadstrat 2 |
.delstrat <number or name> | Deletes a saved strat. The current recordings stay. |
Spawns to record from: Spawns & timers. Everything else in utility mode: Utility & lineups.