Library
Everything you built, sorted per map: prefire routes, nade lineups, strats, arenas and the arena modes' spots, spray and aim spots, plus every in-game command. Play, edit, rename, delete and publish from one place.
The Library is where the things you make in game end up. Save a route with .save, a lineup with .save in utility mode or a strat with .savestrat, and it shows up here on its own within about half a minute: your cloud server uploads what you save every 15 seconds. Routes, lineups, strats and spots you add from the Community hub land here too, marked with the author's name, and so does a round you save with Save as strat in a 2D replay.

The tabs
The number next to a tab is how many you have on every map (spray spots, on Spots). The line under the page title sums up the tab, for example "4 routes on Dust II. 298 runs, 71% cleared.", and the map's picture shows the same numbers big.
| Tab | What's listed | Map it follows | Button on the map's picture |
|---|---|---|---|
| Prefire routes | Your routes, with how often you clear them and your personal best | Your prefire map | New route |
| Nade lineups | Your saved throws, with filters by grenade and name | Your utility map | New lineup, and Publish lineup pack… beside it |
| Strats | Recorded executes: roles and length | Your utility map | Record a strat |
| Arenas | Your custom arenas, with your best on each, then the spots Anchor, Lone Wolf, Site Hold, Rush and Angle Check play | Your gunfight map | New arena |
| Spots | Spray spots and aim spots | Your spray map | None: Publish spray spot pack… and Publish aim spots are by their headings |
| Commands | Every in-game command, searchable | None | None: click a row to copy it |
Press ← / → on the tab row to move between tabs. The Library remembers the last tab you had open. The tab row stays at the top of the page while you scroll down a long list.
Picking a map
Every tab except Commands starts with the map it shows: the game's own picture of it, its name, the tab's numbers ("4 routes, 71% cleared, 298 runs") and the button that makes something new. Along the picture's foot is a row of map chips: one per map in the competitive pool, each saying how many you have there, and +N more for the other maps available (Fewer maps folds them away again). Routes, lineups, strats and spots are saved per map, so the picture and the list change with the chip you pick. When the map the Prefire routes or Nade lineups tab opens on has nothing yet and another map has, it opens on the map with the most.
The map is the same one the Play page uses for that mode. Pick Inferno on Nade lineups and Play → Utility is on Inferno too. Strats play in utility mode, so they share the utility map with lineups. Spots share the spray map with the Spray and Spray transfer drills.
The lists refresh every 10 seconds while your cloud server is on. Leave the Library open on a second screen and you see each .save arrive.
Rows and their menu
Under the map's picture comes the list, then a closed fold with the how-to. A row shows the name, two facts, the number that matters on the right (your personal best on a route or an arena) and one button: Play or Practice. Everything else is in the row's ⋯ menu: the rest of the facts at the top, then what you can do with it.
A tab with nothing on its map yet shows a card instead of the list: what's missing, how the first one is made, and the buttons that make it right there (Draw on the map and New route in game for routes, New lineup, Record a strat, New arena, New spot).

- Rename turns the name into a text box. Enter or Save keeps it, Esc or Cancel doesn't.
- Delete doesn't happen straight away: the row asks first (see Deleting and removing).
- A copy from the hub has Remove from library instead of Delete, and its hub actions (see Community hub marks).
Prefire routes
One row per route on the map: its name, how many bots it has, how often you clear it ("78% cleared", or "Not played yet") and, on the right, your personal best time.
- Play
- Starts the route in prefire mode. See Prefire.
- Menu facts
- Bots (and how many crouch) and the length in meters, your runs and clear rate, when you last edited it, and for a copy the hub item it came from.
- Edit in game
- Opens the route in the editor in game, so you can move bots, add some or re-record the path. See Prefire editor.
- Rename
- Up to 48 characters.
- Publish to the Community hub…
- Opens the publish dialog with this route picked. Once it's published, the menu has Open on the Community hub instead.
- Delete
- The row asks Delete forever?. On a copy from the hub it's Remove from library, which asks Remove from your library?.
- New route
- The orange button on the map's picture. Opens the map in editor mode, the same as typing
.newin game. Draw on map beside it builds a route on the 2D map instead, without opening the game.
How to build a route, the fold under the routes, walks through the editor and has the one-time editor key binds with a Copy button. The Binds page has the same binds.
Nade lineups

One row per saved throw on the map. A row shows the grenade (Smoke, Flash, HE, Molly or Decoy), its number, its name, how it's thrown ("Jump throw", "Run + throw" and so on) and how long it flies ("lands in 1.4 s"). The number is the one .nade 3 takes in game.
- Grenade chips: All plus one chip per grenade type you have, each with its count ("Smoke 4").
- Filter by name: a text box that appears once you have 6 or more lineups on the map.
- Practice
- Starts utility mode on that lineup: you stand on the spot with the grenade in hand and the aim point shown. See Utility & lineups.
- Menu facts
- The whole throw ("Jump throw, left click"), how far away it lands, when you saved it, and for a lineup from a pack, the pack, its author and how many lineups it has.
- Rename
- Up to 40 characters. Same as
.renamenadein game. - Delete
- Deletes that one lineup after Delete forever?. Same as
.delnade. A lineup from a hub pack has Remove the whole pack instead (see Deleting and removing) and See the pack on the Community hub. - New lineup
- Starts utility mode and reminds you: throw a grenade, then type
.saveand a name in chat. - Publish lineup pack…
- Beside New lineup. Opens the publish dialog to share some of your lineups on this map as one pack. Shown once you have at least one lineup of your own here.
Lineup packs you added from the Community hub sit in a From the Community hub block under the list, one row per pack. The hub marks section explains it. How utility mode works, the fold at the bottom, has the utility key binds with a Copy button.
Strats

Recorded executes on the utility map: every role plays at once, one bot per player, grenades included. A row shows the strat's name, how many roles it has and its length (the longest role). Rounds saved from a 2D replay are here too, as ordinary strats (see From a 2D replay).
- Play
- Starts utility mode, loads the strat and runs every role as soon as you're in. See Strats.
- Menu facts
- How many grenades it throws, when you saved it, and for a copy the hub item it came from.
- Publish to the Community hub…
- Opens the publish dialog with this strat picked. Once it's published, Open on the Community hub.
- Delete
- Deletes the strat after Delete forever?. On a copy, Remove from library asks Remove from your library?.
- Record a strat
- Starts utility mode and reminds you how:
.recordone role,.stoprecord, repeat for every role, then.savestratand a name.
Spots
Two parts for the spray map: Spray spots, then Aim spots under them. The map's picture says how many of each the map has. How spots work, the fold at the bottom, sums up both. Anchor spots and the other arena modes' spots are on the Arenas tab.

Spray spots
Every spray spot on the map in play order, tagged Spray or Transfer, with its name (or "Spot 3" when it has none) and whether it was Found automatically or Placed by you. A few are made the first time you play Spray or Spray transfer on a map.
Spray spots have no Play button or menu. You build, play and delete spots in game with .ss: .ss new starts one, .ss go 3 plays spot 3, .ss del 3 deletes it. See Spray and Spray transfer. Publish spray spot pack… by the heading shares some of yours.
Aim spots
Where Aim training puts you. The map's picture says how many aim spots the map has, and the line under the heading how many are your own and how many came from the Community hub. Aim training learns spots as you walk around, and .addspot saves where you stand.
Publish aim spots shares every aim spot of your own on the map (up to 500). Once they're published, the button reads Published, N adds and opens your item on the hub.
Arenas

Your custom arenas on the gunfight map, and the ones you added from the Community hub, by name. The line under the title says how many there are: "3 arenas on Mirage, 1 from the Community hub." A row shows the arena's bots and stages, how it's won (Kill all, Beat 0:20, Survive 0:30), its difficulty, and on the right your best on it since it last changed.
- Play
- Starts your server with that arena, and makes it the one picked on Play → Custom arenas.
- New arena
- The orange button on the map's picture. Opens the arena builder on the map with a new arena.
- Edit on the map / Edit in game
- Opens it in the arena builder, or in the in-game builder on your server.
- Rename / Duplicate
- Renames it in the row, or saves a copy of it ("A site hold copy") that's yours to change. Arenas from the Community hub have no Duplicate: they stay the author's.
- Publish to the Community hub…
- Opens the publish dialog with this arena picked. Once it's published, the row shows Published, N adds, and the menu has Open on the Community hub and Update contents for a new version.
- Leaderboard
- On an arena you published or added from the hub: opens its leaderboard.
- Delete
- Deletes the arena after Delete forever?. On a copy from the hub, Remove from library asks Remove from your library?.
Spots for the arena modes
Under your arenas are the spots the other arena modes play on the same map, one kind at a time: Anchor spots (Anchor and Peek Drill), Lone Wolf spots, Sites (Site Hold, Team Hold and Defusal), Rush spots and Walks (Angle Check and Ambush). Pick the kind with the chips under the heading; hover one for the modes that play it. The map's picture counts the kind shown next to your arenas ("10 Anchor spots").

The spots come in groups: an Anchor spot's side (CT side in blue, T side in orange, Any side for one that plays on the side you're on), a site's bombsite, and the built-in spots apart from the others (Made by you, Found by the generator or Made by you and the generator on their header). A group's header says once what all its spots share (the bots a round, the ring, Built in), so each tile only shows what's its own: its name, and its numbers when they differ. The coloured bar down a tile is its side.
- ▶ (Play)
- Starts the kind's mode on the map from that spot.
- Edit on the map
- In the tile's ⋯ menu, with the spot's other facts (the corners the bots peek from, and so on). Opens the spot editor. Saving an edit of a built-in spot makes it your own.
- New spot
- By the heading (New site, New walk for those kinds), and in the card when the map has none yet.
- Delete
- The tile asks Delete forever? first.
How to build an arena, the fold at the bottom, sums up both builders and the spots. A map has room for 50 arenas.
Commands

Search or pick a mode
Type in the search box (for example "bots", "smoke" or "restart"). Matches are highlighted in the command and its description. The chips narrow it to one mode: All, Everywhere, Aim training, Pop, Gunfights & peeks, Movement, Retakes, Showdown & Scrim, Prefire & editor, Utility, Strats, Bot setup, Deathmatch, Recoil & spray. With All and no search, each group is a fold with its count, and only Everywhere starts open.
Click to copy
Click a row (or focus it and press Enter) and its command is on your clipboard. A row that lists several commands copies the first one: the
.undo/.delrow copies.undo.Paste in game
Type commands in chat starting with
.,!or/, or in the console assay .help.
The tab is a quick reference. All commands has every command with its options and aliases.
Community hub marks
When you use the Community hub, your Library rows show where things came from and what you shared.
| Mark | Where | What it means |
|---|---|---|
| by Garnet chip | Next to the name of a route, lineup or strat, and on a spray spot's second line | A copy you added from the Community hub. Hover it to see the item's title. |
| "Version 2 is out", and a dot on the ⋯ button | Copied routes and strats, pack rows | The author published a newer version. The menu has Update to version 2. A route asks first, in the row: "Get version 2? This replaces your copy, including any edits you made." with Update and Cancel. |
| See it on the Community hub | The menu of a copied route or strat | Opens the author's item on the hub. |
| Published, N adds chip | Next to your own route, strat, lineup or spray spot | It's in something you published (and haven't unpublished). N is how many players have it in their library. Click the chip to open your item on the hub; the row's menu has Open on the Community hub too. |
| Publish to the Community hub… | The menu of your own routes and strats that aren't published | Opens the publish dialog with that one picked. |
| From the Community hub block | Nade lineups, spray spots, aim spots | One row per pack you added: its title (click to open it on the hub), the author, how many lineups or spots it has, and "Version 2 is out" when there's one. Its ⋯ menu has Open on the Community hub, Update to version 2 and Remove from library, which asks Remove from your library? and takes the whole pack off the map. |
A routine you added shows on the warm-up card on Home instead, with an Update link when there's a new version.
A copy plays and edits like your own content. Rename it, edit a copied route in the editor, practice a copied lineup. It stays linked to the author's item, so its update still shows up when they publish a new version. Updates from the author has the details.
Heads up: Taking an update replaces your edits
An update swaps your copy for the author's new version. Renames, moved bots and anything else you changed on that copy are gone. A lineup you deleted from a pack in game comes back, because the whole pack is put in again. The pack's lineups keep their numbers; only new ones get new numbers.
Your own rows never offer an update: Update to version N in the Library always means taking someone else's newer version. To publish a new version of your own item, open it on the hub (the Published, N adds chip) and pick Update contents in its detail panel's ⋯ menu (see Editing and updating).
Deleting and removing
The last item in a row's menu does one of three things, and the row asks before anything happens. Cancel or Esc keeps it.
- Delete forever?
- After Delete on your own route, lineup or strat. Press Delete and it's gone from your training files. There's no undo.
- Remove from your library?
- After Remove from library on a route or strat copied from the hub, or on a pack's row. Press Remove and the copy leaves your training files and your list of added items. You can add it again from the hub while the author keeps it published.
- Remove the whole pack?
- After Remove the whole pack on a lineup from a hub pack. The row names the pack and how many lineups it has. Press Remove pack and every lineup of that pack leaves your training files and your list of added items, like Remove from library on the pack's row.
A pack's lineups can't be removed one by one: the author's next update would put a single lineup back. Keep the pack and skip the throws you don't want, or remove it and save the ones you like as your own lineups.
Where your library is stored
Your library lives in your Grindhouse account. That's why you can rename and delete from the Library without a server running.
- Your cloud server downloads your library when it starts and again whenever it changes, so a copy you add from the hub mid-session is there within seconds.
- What you save in game is uploaded about every 15 seconds and when the map ends.
- Copies from the Community hub go into the same training files, marked with the item they came from.
- Each account has 100 MB of training files. When it's full, adding from the hub says "Your training files are full (100 MB). Delete something from your library first."
Questions
A tab is empty, but I saved something.
Lists are per map. Check the map's picture and its chips (each shows how many that map has): the Library shows the map that mode last used on the Play page. A save also takes up to about half a minute to arrive from your cloud server. And check you're signed in to the same account you played with.
Where did Edit, Rename and Publish go?
Into the row's ⋯ menu, with the facts that don't fit on the row. The row itself keeps one button: Play, or Practice for a lineup.
Can I publish a copy I edited?
No. A copy stays someone else's item, even after you edit it, and the publish dialog shows it greyed out with "by" and the author's name. Build your own version and publish that.