Binds
Put Grindhouse commands on keys. Copy a bind set, paste it into the CS2 console once, and building routes or drilling lineups needs no typing.
css_ + the commandunbind "h"Typing .bot twenty times while you build a route gets old. A bind puts a command on a key: press F and a bot appears where you stand. Grindhouse ships two ready-made sets, one for the prefire editor and one for utility mode, and any other command can be bound the same way.
How Grindhouse binds work
Every command has a console name: css_ followed by the command without its prefix. .restart is css_restart, .ak is css_ak, .nade 3 is css_nade 3. A bind looks like this:
bind "l" "css_restart"
- Arguments go inside the quotes, after the name:
bind "o" "css_dryrun 10". - Several binds on one line are separated with
;. - The short commands follow the mode you're in, so one key can do the right thing everywhere.
css_restartrestarts a prefire run, takes you back to your spawn in utility mode and retries the spot in a spray drill. - A bind replaces what the key did before, in every server you play on. The editor set below takes F (inspect) and G (drop), among others; change any key to one you don't use.
Paste a set into CS2
Copy the set
Use the Copy button on a block below, or the one in the Library: open the How to build a route fold on Prefire routes, or How utility mode works on Nade lineups, and press Copy next to the binds.
Open the console
Press ~ in CS2. If nothing opens, turn on the developer console in CS2's game settings first.
Paste and press Enter
The whole line goes in at once. CS2 keeps your binds, so you only do this once per set.
Prefire editor set
For building routes in the prefire editor. L also restarts a run while you play prefire.
bind "h" "css_start"; bind "j" "css_end"; bind "f" "css_bot"; bind "g" "css_undo"; bind "u" "css_del"; bind "n" "css_crouch"; bind "l" "css_restart"
| Key | Command | What it does |
|---|---|---|
| H | .start | Set the route start where you stand and start recording |
| J | .end | Set the route end and stop recording |
| F | .bot | Place a bot where you stand (crouch first for a crouching bot) |
| G | .undo | Remove the last bot |
| U | .del | Remove the bot you aim at |
| N | .crouch | Toggle crouch on the bot you aim at |
| L | .restart | Restart the prefire run |
Utility set
For utility mode: rethrow, clean up, fly, and step through your lineups.
bind "h" "css_rethrow"; bind "j" "css_clear"; bind "v" "css_noclip"; bind "n" "css_next"; bind "l" "css_restart"
| Key | Command | What it does |
|---|---|---|
| H | .rethrow | Throw your last grenade again |
| J | .clear | Remove smokes, fires and grenades in flight |
| V | .noclip | Fly on / off |
| N | .next | Go to the next saved lineup |
| L | .restart | Back to your locked spawn or the last lineup |
Heads up: The two sets share keys
H, J and N mean different things in the two sets, and the last set you paste wins. Paste the one for what you're about to practice, or move one set to other keys. L is css_restart in both, so it works either way.
More binds worth having
Any command can go on a key. These are the ones players reach for most. Every console name below is a real Grindhouse command; the keys in the examples are only suggestions.
| Console name | Command | Why bind it |
|---|---|---|
css_next | .next | New location in aim training, next route, next lineup, next spray spot |
css_restart | .restart | Retry in every mode: fresh aim session, prefire run, last lineup, spray spot |
css_prev | .prev | Previous prefire route, lineup or spray spot |
css_r | .r | Respawn yourself with the mode's loadout |
css_noclip | .noclip | Fly around the map (utility mode only) |
css_savepos / css_goto | .savepos / .goto | Save a spot and aim, then jump back to it (default slot) |
css_last | .last | Back to where you threw your last grenade, grenade in hand |
css_replay | .replay | Throw your last grenade again and watch it with the camera |
css_rethrow 0 1 | .rethrow 0 1 | Your last two grenades again at once, for combos |
css_timer | .timer | Time a run-out: starts when you move, stops when you stand still |
css_skip | .skip | Aim training: move the bots to new spots |
css_360 | .360 | Aim training: flip between 360° and your normal cone |
css_stats | .stats | Your session numbers in chat |
css_start / css_end | .start / .end | Spray drills: resume and pause |
css_stoprecord | .stoprecord | Strats: finish a recording, also with a grenade or scoped gun in hand |
css_play | .play | Strats: play every recording, again to stop |
css_dryrun 10 | .dryrun 10 | Restart the round with 10 seconds of freeze time to time an execute |
bind "mouse5" "css_next"; bind "mouse4" "css_restart"
bind "o" "css_savepos"; bind "p" "css_goto"
The full list of commands, with every argument, is on All commands.
Keep binds in autoexec.cfg
To keep your Grindhouse binds in one file (handy after a reinstall or on another PC), put them in CS2's autoexec.cfg:
Open CS2's cfg folder
In your Steam library folder:
steamapps\common\Counter-Strike Global Offensive\game\csgo\cfg.Create or open autoexec.cfg
A plain text file. Add one bind per line, or paste a whole set as one line.
Make sure CS2 runs it
If your binds aren't there after a restart, add
+exec autoexecto CS2's launch options in Steam.
// Grindhouse: prefire editor
bind "h" "css_start"
bind "j" "css_end"
bind "f" "css_bot"
bind "g" "css_undo"
bind "u" "css_del"
bind "n" "css_crouch"
bind "l" "css_restart"
Undo a bind
- Remove a bind with
unbindand the key:unbind "h". - Give a key back its normal action by binding it again, for example
bind "f" "+lookatweapon"(inspect) andbind "g" "drop". You can also reassign keys in CS2's keyboard settings. - If the binds are in
autoexec.cfg, delete the lines there too, or they come back the next time CS2 starts.