Skip to content
GrindhouseDocs

Publish your own

Share a route, a lineup pack, a strat, spray spots, aim spots or your warm-up on the Community hub. Update it any time, and everyone who added it gets the new version when they want it.

NeedsSigned in, with Steam connected
Per day30 publishes and new versions (UTC day)
TextTitle up to 60 characters (route 48, strat 40) · description up to 1,000
TagsUp to 5 from the kind's list

Everything you build in Grindhouse can go on the Community hub. Other players find it, add a copy to their library and play it. You stay the author: fix the text any time, publish a new version when you improve it, or take it off the hub.

What you can publish

KindWhat goes inLimits
RouteOne of your prefire routes on a mapNeeds a start and 1 to 40 bots
Lineup packAny of your lineups on one map, ticked from a list1 to 100 lineups
StratOne of your strats on a map1 to 10 recorded roles, up to 40 grenades each
Spray spotsAny of your spray spots on one map, both drills1 to 100 spots
Aim spotsEvery aim spot of your own on one mapThe first 500
RoutineYour current daily warm-up, with each step's target1 to 12 steps, 1 to 120 minutes each

The contents of one item can be up to 4 MB.

Heads up: Only your own work

Things you added from the hub can't be published again, even after you edit them. In the dialog they're greyed out with "by" and the author's name, and aim spots you added are left out of your aim spot pack.

Before you start

  • Connect Steam. Your Steam name and avatar show on everything you share. Without Steam the dialog says "Connect Steam to publish" with an Open Settings button. See Account & Steam.
  • Play it once more. What you publish is what players get, so run the route, throw the lineups or play the strat before you share it.

Where to publish from

WhereButtonOpens with
Community pagePublish (orange, top right), or the button on an empty tabThe tab's kind and the map you picked. From My uploads: a route.
Library → Prefire routes, StratsPublish to the Community hub… in a row's ⋯ menuThat route or strat picked
Library → Nade lineups, SpotsPublish lineup pack… or Publish spray spot pack… by the headingThat map's lineups or spray spots
Library → SpotsPublish aim spotsThat map's aim spots
Today → warm-up cardShare my warm-up in the card's ⋯ menuYour routine. Not offered while your warm-up is someone else's routine.

The publish dialog

The publish dialog with numbered steps: 1 What are you sharing with Lineup pack picked, 2 Map with Dust II picked and +10 more, 3 Pick the lineups with 3 of 8 picked and All and None, 4 Name it with the title and description, then Cancel and Publish
Publish to the Community hub: what, which map, pick what goes in, name it.

The dialog is titled Publish to the Community hub. Its steps are numbered from top to bottom; a routine has no map, so it skips that step.

  1. What are you sharing?

    Route, Lineup pack, Strat, Spray spots, Aim spots or Routine. Switching clears what you picked and drops tags the new kind doesn't have.

  2. Map

    One chip per map in the competitive pool; +N more shows the rest. From the Library the dialog starts on that tab's map; from the Community page, on the map you picked there, else the one you last published on.

  3. Pick what goes in

    Your content on that map. The step says what you're picking: Pick the route, Pick the lineups, Pick the strat, Pick the spray spots, or Your aim spots and Your warm-up, where there's nothing to pick. See the table below.

  4. Name it

    Title: required, with a counter. Up to 60 characters, but 48 for a route and 40 for a strat: a player's copy of a route or strat is named after your title, and those are the longest names they can have in game. It fills itself in from what you pick until you type your own; a route or strat name that's too long is cut after the last whole word that fits. The counter turns red when a title is over the limit. Enter in the title publishes.

    Description: optional, up to 1,000 characters of plain text. A blank line starts a new paragraph.

    Tags: up to 5 from the kind's list. Some are picked for you until you change them.

Until everything's there, the bottom of the dialog says what's missing and Publish stays off. When it goes through: "Published", the dialog closes and your item's detail panel opens. It starts at version 1.

What you pick from

KindYou pickEach row showsTitle it suggests
RouteOne routeBots (and how many crouch), length in metersThe route's name
Lineup packAny number, with an "8 of 20 picked" count and All / NoneGrenade, number, name, how it's thrown, flight timeWhen they're all one grenade "Mirage smokes", "Mirage flashes", "Mirage HE grenades", "Mirage Molotovs" or "Mirage decoys", else "Mirage lineups"
StratOne stratRoles, length, throwsThe strat's name
Spray spotsAny number, with the same count and All / NoneName, Spray or Spray transfer, and "generated" for spots found automatically"Mirage spray spots"
Aim spotsNothing: every aim spot of yours on the map goes in"140 aim spots of yours on Mirage", and how many you added from other players are left out"Mirage aim spots"
RoutineNothing: it's your current warm-upEach step's mode, map ("Your saved map" when none) and minutes, or its target and "up to" its minutes"40-minute warm-up"

Suggested tags: the grenade types in a lineup pack (Smokes, Flashes, Molotovs, HE), Spray or Spray transfer for spray spots, and Warm-up for a routine.

When there's nothing to pick, the step says so and how to make some: "You have no routes on Mirage. Build one with New route in the Library (or .new in game)." For lineups, "Throw one in utility mode and type .save name."; for strats, "Record the roles in utility mode with .record, then save them with .savestrat name."; for spray spots, "Make one in game with .sprayspot new." To share a different routine, change your warm-up on Today first.

A routine's targets go with it as they are, except one on a route of yours: the dialog notes "Route targets become 'any route on the map' when shared.", since your routes aren't on anyone else's PC.

Tags per kind

KindTags you can pick
RoutesT side, CT side, Entry, Clear, Retake, Hold, Pistol, Rifle, AWP, Off-angles, Long, Short, Hard
Lineup packsT side, CT side, Smokes, Flashes, Molotovs, HE, Execute, Retake, Default, One-way, Jump throw, Pistol round
StratsT side, CT side, Execute, Default, Rush, Split, Fake, Retake, Pistol round, Eco
Spray spotsSpray, Spray transfer, Close range, Long range, Hard
Aim spotsOpen areas, Close range, Long range, Off-angles, Hard
RoutinesWarm-up, Aim, Utility, Movement, Short, Long, Pro

What players see

You don't make screenshots or previews. Grindhouse builds them from the contents, and builds them again for every new version:

  • A summary line on the hub's tiles: "6 bots, 42 m", "12 lineups, 5 smokes, 4 flashes, 3 molotovs", "5 roles, 1:20", "8 spots, Spray transfer" (or "Spray", or "Spray & transfer" for a mix), "140 spots", "4 steps, 40 min".
  • A map preview in the detail panel: your route with its start, end and bots; each lineup's throw spot, flight path and landing; each strat role's path and grenades; each spray spot and its bot runs; every aim spot. A routine shows its steps instead.
  • What's inside: one row per lineup, strat role or spray spot, with its name. Good names pay off here.
  • The author: your Steam name and avatar, as they are now.

See The detail panel for how it all looks to players.

Limits and messages

In the dialog

MessageFix
Connect your Steam account to publish.Connect Steam in Settings.
Pick a map.Pick one of the map chips.
Pick the route to share. / Pick the strat to share.Pick one under Pick the route or Pick the strat.
Pick at least one lineup. / Pick at least one spray spot.Tick at least one.
A pack can have 100 at most.Untick some. Make a second pack for the rest.
You have no aim spots of your own on Mirage.Play Aim training there (it learns spots as you walk) or use .addspot.
Your warm-up has no steps. / A routine can have 12 steps at most. / Each step is 120 minutes at most.Edit your warm-up on Today.
Give it a title.Type a title.
A route's title is 48 characters at most: it becomes the route's name in game. / A strat's title is 40 characters at most: it becomes the strat's name in game. / The title is 60 characters at most.Shorten the title. The counter next to it shows the limit for the kind, in red while the title is over it.
Your library didn't answer. Check your connection and try again.Your list didn't load within 10 seconds. Press Try again.

After you press Publish

MessageWhy
You can publish or update 30 times a day. Try again tomorrow.New items and new versions count, up to 30 per day (the day changes at midnight UTC). Editing the text doesn't count, and neither does a publish that was refused.
“A site from palace” came from the Community hub (Garnet). Only your own content can be published.You picked a copy.
The route has no bots.The route isn't finished. Open it with Edit in game in its ⋯ menu in the Library.
A route can have 40 bots at most. / The route is too long.Split it into two routes.
A strat can have 10 recordings at most. / A recording is empty or too long.Load it with .loadstrat, delete a role with .clearrec (or record it again), then .savestrat with the same name.
A spray spot can't be played: …One of the spots you picked is broken; the end of the message says how. Fix it with .ss in game, or leave it out.
This is too big to share (4 MB at most).Share fewer lineups or spots per pack.
That route isn't in your library. / That strat isn't in your library.It was deleted from your library. Pick another one, or build it again.

Editing and updating

Publish v1 On the hub for everyone signed in Counts toward 30 a day Edit details v1 Title, description, tags Everyone sees it at once Update contents v2 Players who have v1 get an Update button Counts toward 30 a day Unpublish hidden Copies stay with players No more versions
Text edits never need an update. New contents make a new version, and players take it when they want.

Your items are in My uploads on the Community page; you can also open one from its tile on the hub, or with the Published, N adds chip on its Library row. Its row in My uploads and its detail panel both have Play, Edit details, Update contents, Copy link and Unpublish: in the panel, Edit details is a button and the rest are in the ⋯ menu.

Edit details: text and tags

  1. Pick Edit details

    The dialog is titled Edit details: "Version 1. Text and tags only: everyone sees the change and nobody needs to update."

  2. Change the title, description or tags

    Kind, map and contents can't change here. A route or strat published before the 48 and 40 character limits can keep a longer title: its counter is red and the dialog says "It can stay as it is; a changed one has to fit." Edit the title and it has to fit the limit before you can save.

  3. Save changes

    "Changes saved." The version stays the same. If nothing changed, the dialog just closes: "Nothing changed."

Update contents: a new version

  1. Change it in your library first

    Move bots with Edit in game on the route, re-record a strat role, save new lineups. The update is built from what's in your library now.

  2. Pick Update contents

    The dialog is titled Update “A site from palace”: "Route on Mirage. This publishes version 2; everyone who added it gets an Update button." Its pick step opens with what you published last time already picked. Tick new lineups into a pack, or untick ones you want out.

  3. Publish version 2

    Change the text in the same go if you like. "Version 2 is out. Everyone who added it gets an Update button."

Kind and map stay the same. Players keep playing the version they have until they press Update, which replaces their copy, and any edits they made to it, with yours. See Updates from the author.

In a lineup pack, the lineups players already have keep their numbers when they update, and so does a lineup you changed as long as it's the same grenade. New lineups go after everything on their map, so put the throws that belong together in the first version where you can.

Tip:

Update rather than publishing again. A new version keeps your adds, plays and link, and everyone who has the old one gets told. A second item starts from zero and leaves players on the old one.

Unpublishing

  1. Pick Unpublish

    In the ⋯ menu of your item's detail panel, or of its row in My uploads.

  2. Confirm

    The panel asks "Unpublish “A site from palace”? It disappears from the hub and nobody gets updates any more. The 12 players who added it keep their copy." (the row in My uploads asks the same in fewer words). Press Unpublish, or Cancel. Done: "Unpublished. People who added it keep their copy."

  • The item leaves the hub's lists and can't be added any more. Players who have it keep their copy and see "The author unpublished this".
  • It stays in My uploads, marked Unpublished. You can still play it and edit its text.
  • There's no way back: it can't get new contents ("An unpublished item can't get new contents."). To share it again, publish it as a new item.
  • There's no delete button. Unpublishing is how you take something down. Your own original in your library isn't touched.
  • If you delete your Grindhouse account, everything you published is unpublished and the author shows as "Deleted player". Players keep their copies.

Reports and featuring

Any player can report an item from its detail panel (It doesn't work, Wrong map or title, Someone else's work, Offensive, Spam, or their own words). Reports go to the Grindhouse team; you don't see them or who sent them.

Featured
The team can feature an item. It gets a star and Featured next to its title ("Featured: picked by the Grindhouse team") and is listed first when players sort by Most added.
Taken down
The team can take an item down. It disappears from the hub like an unpublished item and players who added it keep their copy. You still see it in My uploads, where its summary reads "Taken down by the Grindhouse team", and it can't get new versions.

Tips for a great pack

Names

  • Name lineups like callouts: what, from where. "Window from T spawn", "CT smoke from top mid", "Xbox jump throw". The names show in the hub's What's inside list and in .nades for everyone who adds it. Lineup names stop at 40 characters.
  • Keep titles short. A copied route or strat takes your title as its name, which is why their titles stop at 48 and 40 characters. Short titles also fit the hub's tiles better: a tile shows two lines of the title.
  • Lead route titles with the place. .prefire plays a map's routes in name order, so "A site from palace" and "A site from ramp" sit together in a player's playlist.
  • Name every strat role. .record 5 A main smoke names the role as you record it. Role names are the rows of What's inside.
  • Name spray spots. .ss save Long doors. Unnamed spots show as "Spot 3".

Contents

  • One map, one idea per pack. "Mirage A execute" beats "all my Mirage nades". Players add what they need, and the map preview stays readable.
  • Order lineups the way you'd practice them. A pack keeps your lineup order, and .next and .start step through lineups by number. Save the throws in execute order and the pack plays in execute order.
  • Leave out the spots you didn't check. Spray spots marked "generated" were found automatically; include the ones you've played and liked.
  • Aim spots go in all at once. Every aim spot of yours on the map is included, up to 500. Play Aim training around the whole map first so the pack covers it.

Description and tags

  • Say what it trains, which side it's for and anything players should know before they play it ("Every throw is a jump throw", "Best with bots shooting back"). Blank lines make paragraphs.
  • Pick the tags players would filter by. They can stack tags in Filters, and only items with all of them show up.